Last Modified: 11-29-2007 1.6 J
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: Sequoia Doc ID: RM000003GLH000X
Title: SEAT: REAR POWER SEAT CONTROL SYSTEM: DESCRIPTION (2008 Sequoia)

Position Sensor Circuit

DESCRIPTION

The fold seat control ECU receives switch operation signals from the rear power seat switch and fold seat switch, and activates the power seat motor. At this time, the Hall IC (seatback position sensor) detects the actuation of the seatback and sends a seatback actuation signal to the fold seat control ECU. The fold seat control ECU uses signals from the Hall IC (seatback position sensor) to detect if an object is caught or if any other abnormal condition has occurred.

WIRING DIAGRAM



INSPECTION PROCEDURE

PROCEDURE

1.

CHECK FOLD SEAT CONTROL ECU (SV2 TERMINAL)


(a) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

LH Side

Tester Connection

Condition

Specified Condition

O34-25 (SV2) - O34-36 (SG2)

Back door open

11 to 14 V

RH Side

Tester Connection

Condition

Specified Condition

P20-25 (SV2) - P20-36 (SG2)

Back door open

11 to 14 V

OK

2.

CHECK FOLD SEAT CONTROL ECU (POSITION SENSOR SIGNAL)


(a) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

LH Side

Tester Connection

Condition

Specified Condition

O34-22 (SRCL) - O34-36 (SG2)

Motor is operating

Below 1 V ←→ 11 to 14 V

Pulse generation

RH Side

Tester Connection

Condition

Specified Condition

P20-22 (SRCL) - P20-36 (SG2)

Motor is operating

Below 1 V ←→ 11 to 14 V

Pulse generation

OK

3.

CHECK HARNESS AND CONNECTOR (FOLD SEAT CONTROL ECU - NO. 1 POWER SEAT MOTOR)


(a) Disconnect the O34 or P20 ECU connector.

(b) Disconnect the a2 or Y2 motor connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

LH Side

Tester Connection

Condition

Specified Condition

O34-22 (SRCL) - a2-1 (HLS)

Always

Below 1 Ω

O34-22 (SRCL) - Body ground

Always

10 kΩ or higher

O34-25 (SV2) - a2-3 (HLV)

Always

Below 1 Ω

O34-25 (SV2) - Body ground

Always

10 kΩ or higher

O34-36 (SG2) - a2-2 (HLG)

Always

Below 1 Ω

O34-36 (SG2) - Body ground

Always

10 kΩ or higher

LH Side

Tester Connection

Condition

Specified Condition

P20-22 (SRCL) - Y2-1 (HLS)

Always

Below 1 Ω

P20-22 (SRCL) - Body ground

Always

10 kΩ or higher

P20-25 (SV2) - Y2-3 (HLV)

Always

Below 1 Ω

P20-25 (SV2) - Body ground

Always

10 kΩ or higher

P20-36 (SG2) - Y2-2 (HLG)

Always

Below 1 Ω

P20-36 (SG2) - Body ground

Always

10 kΩ or higher

OK